Polaris RZR 900 2015 Service Manual page 209

10. Torque lower crankcase bolts in sequence to
specification. Repeat sequence to verify final torque.
TORQUE
Lower Crankcase Bolts:
M10 Bolts:
Step 1: 9 ft-lb (12 Nm)
Step 2: 21 ft-lb (28 Nm)
Step 3: Tighten add'n 90°
M8 Bolts:
26 ft-lb (35 Nm)
M6 Bolts:
9 ft-lb (12 Nm)
11. Rotate the engine so the cylinder is facing up.
o
12. Install the eleven M6
crankcase bolts. Tighten all bolts lightly by hand.
9926814 R08 -
Manual
© Copyright Polaris Industries Inc.
13. Torque the upper crankcase bolts in sequence to
14. Rotate the engine so the cylinder is facing down.
15. Install a new seal on the oil pump.
16. Lift the oil pump drive chain and install the oil pump.
i
and two M8 upper
2015-2016 RZR 900
ENGINE / COOLING SYSTEM
specification (start with #12). Repeat the sequence
to verify final torque.
TORQUE
Upper Crankcase Bolts:
M8 Bolts: 26 ft-lb (35 Nm)
M6 Bolts: 9 ft-lb (12 Nm)
2016 RZR S 1000 Service
3
3.131