Polaris RZR 900 2015 Service Manual page 307

Table of Contents

14. Install the cam (helix) assembly over the shaft. Line

up the "X" on the cam, "X" on spider, and "X" on the

stationary sheave or use the marks previously made

before disassembly.

If the cam assembly (helix) is difficult to install, be sure

the sheaves are aligned. To align the sheaves place the

clutch assembly on a flat surface with the cam

assembly (helix) side down. Press down on the

moveable sheave belt face with both hands and the

helix will release.

15. Use a T25 Torx driver to install the four helix retaining

and torque to specification.

9926814 R08 -

2015-2016 RZR 900

Helix Retaining Screws:

48 in-lb (5 Nm)

2016 RZR S 1000 Service

Chapters

Table of Contents