Polaris RZR 900 2015 Service Manual page 429

34. Install Bottom Out Cup into the body cap prior to
installing body (if equipped).
35. Apply Loctite® 638 to body two threads down and two
threads wide 360° around body.
36. Place body in clamp blocks and torque body cap to
100 ft-lbs (136 Nm) using body cap socket.
37. Place body in block clamps parallel to the ground.
38. Replace both O-rings on DSC or LSC.
9926814 R08 -
Manual
© Copyright Polaris Industries Inc.
39. Torque DSC to 35 ft-lbs (47 Nm) or LSC to 12 ft-lbs
(16 Nm).
40. Apply Loctite® to LSC screw (if equipped).
41. Install LSC knob and torque screw to specification.
42. Install reservoir O-ring.
2015-2016 RZR 900
STEERING / SUSPENSION
2016 RZR S 1000 Service
8.41
8