Balance Shaft Removal / Inspection - Polaris RZR 900 2015 Service Manual

14. Remove the eleven) M6
crankcase bolts.
15. Rotate the engine so the cylinder is facing down.
j
16. Remove the one M6 , eight M10
lower crankcase bolts. Discard the eight M10 bolts.
17. Tap on the lower crankcase in reinforced areas with
a soft faced hammer to loosen. Carefully lift up and
remove the lower crankcase half.
9926814 R08 -
Manual
© Copyright Polaris Industries Inc.
g h
and two M8 upper
k l
and two M8
2015-2016 RZR 900
ENGINE / COOLING SYSTEM

BALANCE SHAFT REMOVAL / INSPECTION

1. Perform "Crankcase Disassembly / Inspection"
procedure.
2. Note timing marks on balance shaft and crankshaft
drive gears. Shafts must be properly timed upon
assembly.
3. Carefully rotate the balance shaft
from the crankcase.
4. Inspect the balance shaft gear teeth for damage.
2016 RZR S 1000 Service
3
q
and remove it
3.55