ENGINE / COOLING SYSTEM
STARTER ONE-WAY CLUTCH DISASSEMBLY
1. Lift up to remove starter one-way gear.
2. Remove the three one-way clutch retaining screws.
3. Remove the one-way clutch and inspect both sides
q
of drive rollers
. Inspect the roller contact surface
w
inside the hub for wear, damage or uneven
surface.
9926814 R08 -
3.108
4. Inspect drive surface of starter gear
r
for wear, damage or uneven surface. If any starter
one-way clutch component is worn or damaged,
replace the clutch and starter gear as an assembly.
2015-2016 RZR 900
e
and bushing
2016 RZR S 1000 Service
Manual
© Copyright Polaris Industries Inc.