Vehicle Lifting Points - Suzuki Grand Vitara 2011 Manual

Hide thumbs Also See for Grand Vitara 2011:

Table of Contents

0A-6 General Information:

Vehicle Lifting Points

• Before applying hoist to underbody, always take vehicle balance throughout service into

consideration. Vehicle balance on hoist may change depending of what part to be removed.

• Before lifting up the vehicle, check to be sure that end of hoist arm is not in contact with brake pipe,

fuel pipe, bracket or any other part.

• When using frame contact hoist, apply hoist as shown (right and left at the same position). Lift up

the vehicle till 4 tires are a little off the ground and make sure that the vehicle will not fall off by

trying to move vehicle body in both ways. Work can be started only after this confirmation.

• Make absolutely sure to lock hoist after vehicle is hoisted up.

1. Support position for frame contact hoist (when engine assembly is not removed) and safety stand

2. Support position for frame contact hoist (when engine assembly is removed)

S6JB0A0101005

I5JB0A010002-02

3. Floor jack position

4. Vehicle front

Table of Contents