Repair Instructions; Engine Accessory Drive Belt Inspection; (Petrol Engine Model); Engine Accessory Drive Belt Replacement (Petrol Engine Model) - Suzuki Grand Vitara 2011 Manual

Engine Accessory Drive Belt Inspection (Petrol
Engine Model)
WARNING
!
All inspection and replacement are to be
performed with ENGINE NOT RUNNING.
Water Pump and Generator Drive Belt
Inspect belt for cracks, cuts, deformation, wear
cleanliness and tension. If any defect exists, adjust or
replace.
For belt inspection, refer to "Water Pump and Generator
Drive Belt Tension Inspection and Adjustment (For M16
Engine): For Petrol Engine Model in Section 1J" or
"Water Pump and Generator Drive Belt On-Vehicle
Inspection (For J20 Engine): For Petrol Engine Model in
Section 1J".
[A]: M16 engine
[B]: J20 engine without A/C

Repair Instructions

S6JB0A0206001
I5JB0A020018-01
[C]: J20 engine with A/C
Maintenance and Lubrication:
Power Steering Pump and A/C Compressor (If
Equipped) Drive Belt (M16 Engine)
Inspect belt for cracks, cuts, deformation, wear
cleanliness and tension. If any defect exists, adjust or
replace.
For inspection, refer to "P/S Pump and A/C Compressor
(If Equipped) Drive Belt Inspection and Adjustment
(M16A Engine Model) in Section 6C".
Engine Accessory Drive Belt Replacement

(Petrol Engine Model)

Water Pump and Generator Drive Belt
Replace belt referring to "Water Pump and Generator
Drive Belt Removal and Installation (For M16 Engine):
For Petrol Engine Model in Section 1J" or "Water Pump
and Generator Drive Belt Removal and Installation (For
J20 Engine): For Petrol Engine Model in Section 1J".
Power Steering Pump and A/C Compressor (If
Equipped) Drive Belt (M16 Engine)
Replace belt and then adjust belt tension referring to "P/
S Pump and A/C Compressor (If Equipped) Drive Belt
Removal and Installation (M16A Engine Model) in
Section 6C".
Engine Accessory Drive Belt, Tensioner and
Idler Replacement (Diesel Engine Model)
WARNING
!
Replacement must be performed with battery
negative cable disconnected to avoid a
personal injury.
Replace belt (1), tensioner (2) and idlers (3) with new
ones referring to "Accessory Drive Belt and Idler Pulley
Removal and Installation: For Diesel Engine Model in
Section 1J".
Check crankshaft pulley (4) for wear and damage, and
replace it as necessary.
3
0B-6
S6JB0A0206002
S6JB0A0206041
4
1
2
I5JB0B020001-02