Propeller Shafts And Drive Shafts Inspection; Manual Transmission Oil Inspection - Suzuki Grand Vitara 2011 Manual

Hide thumbs Also See for Grand Vitara 2011:
Table of Contents

Advertisement

0B-15 Maintenance and Lubrication:

Propeller Shafts and Drive Shafts Inspection

Propeller Shafts Inspection
1) Check universal joint and spline of propeller shaft for
rattle. If rattle is found, replace defective part with a
new one.
2) Check propeller shaft (front and rear) flange yoke
bolts for tightness, and retighten them as necessary.
Refer to "Tightening Torque Specifications in Section
3D".
Drive Shafts Inspection
Check drive axle boots (wheel side and differential side)
(1) for leaks, detachment, tear or other damage.
Replace boot as necessary.
1

Manual Transmission Oil Inspection

S6JB0A0206027
1) Inspect transmission case for evidence of oil
leakage. Repair leaky point if any.
2) Make sure that vehicle is placed level for oil level
check.
3) Remove level / filler plug (1) of transmission.
4) Check oil level.
Oil level can be checked roughly by means of level
plug hole. That is, if oil flows out of level plug hole or
if oil level is found up to hole when level / filler plug is
removed, oil is properly filled.
If oil is found insufficient, pour specified amount of
specified oil.
[A]
I5JB0A020019-02
[B]
I5JB0A020012-01
[A]: Petrol engine model
[B]: Diesel engine model
2. Drain plug
5) Tighten level / filler plug to specified torque referring
to "Manual Transmission Oil Change: For Petrol
Engine Model in Section 5B" or "Manual
Transmission Oil Change: For Diesel Engine Model
in Section 5B".
S6JB0A0206028
1
2
1
2
I6JB0A020002-01

Advertisement

Table of Contents
loading

Table of Contents