W0301 Cables (Model No. Jzmsz-120W0301- ) - YASKAWA MEMOCON GL120 User Manual

3 Digital I/O Specifications
3.3.4 W0301 Cables (Model No. JZMSZ-120W0301-
3.3.4
1) Use
2) Specifications
3) Appearance
)
W0301 Cables (Model No. JZMSZ-120W0301-
(1) This Cable is used to connect external devices to the Modules listed below.
(a) 12/24VDC 32-point Input Module (Model No. JAMSC-120DDI35400)
(b) 12/24VDC 32-point Output Module (Model No. JAMSC-120DDO35410)
(2) The end of the Cable on the external device is fitted with a connector.
Use the Cable in combination with a 32-point I/O connector Terminal Block.
See 3.3.5 32-point I/O Connector Terminal Block for information about the 32-
point I/O connector Terminal Block.
The following table shows specifications of W0301 Cables.
Item
Model Name W0301-01
Model No. JZMSZ-120W0301-01 JZMSZ-120W0301-03
Length L 1.0 m
Cable
Shielded cable, 40 cores, equivalent to UL20276, AWG28 (0.08 mm
Specifications
Cable Module
Termination side
External
device
side
Insulation 100 MΩ min. at room temperature and humidity between core wires
Resistance (connected together) and shielding wire, and between core wires
(measured with a 500-VDC test voltage megohmmeter).
The following illustration shows the appearance of a W0301 Cable.
Connector 1 (Module side)
Table 3.5 Specifications of W0301 Cable
Specifications
W0301-03
3.0 m
Connector: Connector 10140–6000EL (3M)
Shell 10640-5500-008 (3M)
Screw 3342-26 (3M)
Latch 10600-L0F0-8 (3M)
Connector fitted: FCN-361J040-AU + FCN-360C040-E
(made by Fujitsu Ltd.).
Model name
Shielded cable
3-68
)
W0301-05
JZMSZ-120W0301-05
5.0 m
Connector 2 (external device side)
2
)