W5410 Cables (Model No. Jepmc-W5410- ) - YASKAWA MEMOCON GL120 User Manual

3 Digital I/O Specifications
3.3.6 W5410 Cables (Model No. JEPMC-W5410-
3.3.6
1) Use
2) Specifications
3) Appearance
)
W5410 Cables (Model No. JEPMC-W5410-
(1) This Cable is used to connect external devices to the Modules listed below.
(a) 12/24-VDC 64-point Input Module (Model No. JAMSC-120DDI36400)
(b) 12/24-VDC 64-point Output Module (Model No. JAMSC-120DDO36410)
(c) Register Input Module (Model No. JAMSC-120RDI34410)
(d) Register Output Module (Model No. JAMSC-120RDO34410)
(2) The end of the Cable to the external device is loose wires.
The following table shows specifications of W5410 Cables.
Item
Model Name W5410-05
Model No. JEPMC-W5410-05
Length L 0.5 m
Cable
Shielded cable, 40 cores, AWG24 (0.20 mm
Specifications
Cable Module
Termination side
External
device
side
Insulation 100 MΩ min. at room temperature and humidity between core wires
Resistance (connected together) and shielding wire, and between core wires
(measured with a 500-VDC test voltage megohmmeter).
The following illustration shows the appearance of a W5410 Cable.
Connector (Module side)
Model name
Table 3.9 Specifications of W5410 Cable
Specifications
W5410-10
JEPMC-W5410-10
1.0 m
Connector: FCN-363J-040 (Fujitsu Ltd.)
FCN-360C040-B (Fujitsu Ltd.)
FCN-363J-AU/R (Fujitsu Ltd.)
Loose wires: Wire length 100 mm with pin number label on
each wire.
A pin number label is on
each loose wire.
Shield cable
L
3-74
)
W5410-30
JEPMC-W5410-30
3.0 m
2
)
Loose wires (external device side)
100 mm
40-core
loose wires