YASKAWA MEMOCON GL120 User Manual page 176

5) I/O Allocation
I/O allocation is necessary when using the Analog Output Module (±10 V, 4 chan-
nels) or Analog Output Module (0 to 5 V, 2 channels). For further details on I/O allo-
cation, refer to 4.3 I/O Allocation.
6) External Appearance
The appearance and configuration of the Analog Output Module (0 to 10 V, 2 chan-
nels) are shown below. The appearance and configuration of the Analog Output
Module (0 to 5 V, 2CH) are the same as the following illustration except for the
model description.
Color code
(dark green)
LED area
Module mounting screw
(Use a M4 Phillips screwdriver.)
LED Area
120 AVO 011 00
ACT
ERR
RDY
Module description
(120AVO01100)
Removable terminal block
for field connections
Field wiring terminal
(Use a M3 Phillips screwdriver.)
LED Color State
RDY Green Lit
Flashing
Not lit
ACT Green Lit
Not lit
ERR Red Flashing
Not lit
4-29
4.2 Analog Output Specifications
Hinged terminal cover Signal label insert
Terminal block mounting screw
(Use a M3 Phillips screwdriver.)
Indication when ON
Module is normal.
Initial check error has occurred.
WDT timeout error has occurred.
Module is processing I/O.
CPU Module is in the STOP state or I/O pro-
cessing error has occurred.
Parameter checksum error has occurred.
Module is normal.
4