Installation And Wiring; Installing Modules; Module Installation Location - YASKAWA MEMOCON GL120 User Manual

6 Installation and Wiring

6.1.1 Module Installation Location

6.1

Installing Modules

6.1.1
1) Module Installation Loacation
2) Module Installation Location on Mounting Base
Product
Digital Input
Modules
Analog Input
Modules
This section describes how to install Modules on a Mounting Base in the control
panel.

6.1.1 Module Installation Location - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-2

6.1.2 Installing I/O Modules with Terminal Blocks - - - - - - - - - - - - - - - - - - - 6-4
6.1.3 Installing I/O Modules with Connectors - - - - - - - - - - - - - - - - - - - - - 6-10
Module Installation Location
Install the following Modules on a Mounting Base. The mounting procedures for
installing I/O Modules and Special Purpose Modules on the Mounting Base are
described in 6.1.2 Installing I/O Modules with Terminal Blocks and 6.1.3 Installing
I/O Modules with Connectors.
• Power Supply Modules
• CPU Modules
• Communication Modules
• I/O Modules
• Special Purpose Modules
• Motion Modules
• Expander Modules
The following table shows the Module installation location on the Mounting Base.
Table 6.1 Module Installation Location on Mounting Base
Name
100-VAC 16-point Input Module
200-VAC 16-point Input Module
12/24-VDC 16-point Input Module
12/24-VDC 32-point Input Module
12/24-VDC 64-point Input Module
Analog Input Module
(±10V, 4 channels)
Analog Input Module
(0 to 10V, 4 channels)
Analog Input Module
(0 to 20 mA, 4 channels)
Model No.
JAMSC-120DAI54300
JAMSC-120DAI74300
JAMSC-120DDI34300
JAMSC-120DDI35400
JAMSC-120DDI36400
JAMSC-120AVI02000
JAMSC-120AVI02100
JAMSC-120ACI02000
6-2
Installation Location
Any rack on the Mounting
Base
Any rack on the Mounting
Base