YASKAWA MEMOCON GL120 User Manual page 197

4 Analog I/O Specifications
4.4.3 I/O Allocations
8) Setting the Timeout Output Data (Only for Analog Output Modules)
The MEMOSOFT is set by default to OPEN OUTPUT.
Fig. 4.20 Timeout Output Status Selection
Note: The timeout output setting is only for Analog Output Modules,
but not for Analog Input Modules.
Make sure that the Parameter Setting Screen (I/O Map Module Editor) is being dis-
played.
(1) Move the cursor to the input field for USER SET VAUE and input a value.
Then, press the Enter Key.
Input 100
for example
Fig. 4.21 Parameter Setting Screen: Timeout Output Data
The MEMOSOFT is set by default to 0.
Fig. 4.22 Timeout Output Data Setting
Note: The timeout output data setting is only for Analog Output Mod-
ules, but not for Analog Input Modules.
4-50