12/24-Vdc 64-Point Input Module - YASKAWA MEMOCON GL120 User Manual

3 Digital I/O Specifications

3.1.5 12/24-VDC 64-point Input Module

Note: (1) The symbol " -
(2) The terminal block number for the 32-point I/O connector type (manufactured
3.1.5
1) Performance Specifications
" in the type stands for length for the cable. See 3.3 I/O Mod-
ule Cables for details.
by OMRON) is not that same as that for the 12/24-VDC 32-point Output Mod-
ule. Refer to 3.3 I/O Module Cables for details.

12/24-VDC 64-point Input Module

The Module does not conform to JIS B3502 when used as a 12-VDC Module.
Item
Name 12/24-VDC 64-point Input Module
Model Name DC24IN-64P
Model No. JAMSC-120DDI36400
Rated Voltage 12/24 VDC
Maximum Allowable 30 VDC
Voltage
Input Form Sourcing or sinking
Rated Current 2 mA
Input Impedance 5.6 kΩ
Standard Operating Minimum ON voltage: 9 VDC
Ranges
Maximum OFF voltage: 5 VDC
Input Type Does not conform to JIS B3502.
Input Delay Times OFF to ON: 5 ms max.
ON to OFF: 5 ms max.
Number of Commons 4
Number of Inputs per 16 points/common
Common
External Connections 40-pin connector: 2 pieces
Connector type: FCN-365P040 (made by Fujitsu)
Number of Inputs 64
Input Signal Indica- Indicator for each point; lit when the input is ON.
tion Status saved in internal logic.
32 indicators controlled by toggle switches
Status Indication ACTIVE: Lights during input processing
Insulation Method Photocoupler
Dielectric Strength 1,500 VAC for 1 min or 1,800 VAC for 1 s between input terminals and
internal circuits and between all input commons
Insulation Resistance 100 MΩ min. at room temperature and humidity between input terminals
and ground (measured with a 500-VDC test voltage megohmmeter).
External Power Sup- 12 VDC supplied to signals
ply
Derating Conditions None
Internal Current Con- 100 mA max. at 5 VDC (with all points ON)
sumption
Maximum Heating 7.0 W
Value
Specification
At 12 VDC
3-18
At 24 VDC
4 mA
DC type 2 (according to JIS B3502)
24 VDC supplied to signals