W0302 Cables (Model No. Jzmsz-120W0302- ) - YASKAWA MEMOCON GL120 User Manual

3.3.3 W0302 Cables (Model No. JZMSZ-120W0302-
1) Use
(1) This Cable is used to connect external devices to the Modules listed below.
(a) 12/24-VDC 32-point Input Module (Model No. JAMSC-120DDI35400)
(b) 12/24-VDC 32-point Output Module (Model No. JAMSC-120DDO35410)
(2) The end of the Cable to the external device is loose wires.
2) Specifications
The following table shows specifications of W0302 Cables.
Item
Model Name
Model No.
Length L
Cable
Specifications
Cable
Termination
Insulation
Resistance
3) Appearance
The following illustration shows the appearance of a W0302 Cable.
The difference between the W0300 Cable and the W0302 Cable is the size of the end
INFO
which connects to the Module Connector.
Table 3.4 Specifications of W0302 Cable
W0302-01 W0302-03
JZMSZ-120W0302-01 JZMSZ-120W0302-03
1.0 m 3.0 m
Shielded cable, 40 cores, equivalent to UL20276, AWG24 (0.20 mm
Module Connector: Connector 10140-6000EL (3M)
side Shell 10640-5500-008 (3M)
Screw 3342-26 (3M)
Latch 10600-L0F0-8 (3M)
External Loose wires: Wire length 150 mm with pin number label on
device each wire.
side
100 MΩ min. at room temperature and humidity between core wires
(connected together) and shielding wire, and between core wires
(measured with a 500-VDC test voltage megohmmeter).
Connector (Module side)
Model Name
A pin number label is on each loose wire
Shielded cable
3-65
3.3 I/O Module Cables
)
Specifications
W0302-05
JZMSZ-120W0302-05
5.0 m
Loose wires (external device side)
150 mm
3
2
)
40-core
loose
wires