YASKAWA MEMOCON GL120 User Manual page 232

Install the Module with Terminal Blocks on the Mounting Base in the following man-
ner.
a) Remove the cover from the Module connector on the Mounting Base.
b) Loosen the terminal block mounting screws, then remove the terminal block from the
Module.
Terminal block
Module
c) Install the Module on the Mounting Base as shown below.
(1) Hook the Module to the Module hook on the Mounting Base.
Module hook
Module
connector
Mounting Base
Module hook
Terminal block
mounting screw
Terminal block mounting screw
Module
6-5
6.1 Installing Modules
Module connector
6