YASKAWA MEMOCON GL120 User Manual page 113

Input signal
When allocating input relays, the MEMOSOFT is set by default to "MSB."
When input relay allocation is set to "MSB," the leading reference number is allocated
IMPORTANT
to the smallest input number (input 1) on the Input Module.
(2) When input register 300001 is allocated, the bit order can be set to either
"MSB" or "LSB," as described in the following table and shown in the illustration
below it.
Input Register LSB Setting
Input Register MSB Setting
Refer to Fig. 3.2 Allocation of Input Registers for details.
Input signals
When allocating input registers, the MEMOSOFT is set by default to "LSB."
When input register allocation is set to "LSB," bit 15 (MSB) of the input register is
IMPORTANT
allocated to the smallest input number (input 1) on the Input Module.
Terminal number
Input 1
Input 2
Input 3
Input 4
Input 5
Input 6
Input 7
Input 8
Input 9
Input 10
Input 11
Input 12
Input 13
Input 14
Input 15
Input 16
Fig. 3.1 Allocation of Input Relays
Bit 15 (MSB) of the input register (300001) is allocated to the
smallest input number (input 1) on the Input Module.
Bit 15 (MSB) of the input register (300001) is allocated to the larg-
est input number (input 16) on the Input Module.
Terminal number
Input 1
Input 2
Input 3
Input 4
Input 5
Input 6
Input 7
Input 8
Input 9
Input 10
Input 11
Input 12
Input 13
Input 14
Input 15
Input 16
Fig. 3.2 Allocation of Input Registers
3-83
MSB Setting LSB Setting
LSB Setting MSB Setting
3.4 I/O Allocation
3