12/24-Vdc 16-Point Output Module (Sourcing) - YASKAWA MEMOCON GL120 User Manual

3 Digital I/O Specifications

3.2.5 12/24-VDC 16-point Output Module (Sourcing)

3.2.5
1) Performance Specifications

12/24-VDC 16-point Output Module (Sourcing)

Item
Name
Model Name
Model No.
Rated Voltage
Allowable Voltage Range
Output Form
Maximum Load Current
Output Voltage Drop
Output Delay Times
OFF Leakage Current
Output Type
Number of Commons
Number of Outputs per Common
External Connections
Output Protection Type
Built-in Fuse
Surge Suppressor
Other Output Protection
Number of Outputs
Output Signal Indication
Status Indication
Insulation Method
Dielectric Strength
Insulation Resistance
External Power Supply
Derating Conditions
Internal Current Consumption
Maximum Heating Value
Hot Swapping
(Removal/insertion under power)
Approximate Mass
External Dimensions
12/24-VDC 16-point Output Module (Sourcing)
DC24OUT-16PSR
JAMSC-120DDO34320
12/24 VDC
10.2 to 30.0 VDC
Sourcing
0.5 A/point, 1.0 A/4 points
1.5 V max (0.5 A)
OFF to ON: 1 ms max.
ON to OFF: 1 ms max.
1 mA max. at 24 VDC
Transistor outputs
2
8 points/common
Removable terminal block with M3 screw terminals
Unprotected outputs (according to JIS B3502)
Two, 4-A fuses (one per common)
(Burnout time: 5 s max. at 200% of rated current)
None
None
16
Indicator for each point; lit when the output is ON.
Status saved in internal logic.
ACTIVE: Lights during output processing
F: Lights when fuse is burnt out or output power supply is not
connected
Photocoupler
1,500 VAC for 1 min or 1,800 VAC for 1 s between output
terminals and internal circuits and between all output com-
mons
100 MΩ min. at room temperature and humidity between
output terminals and ground (measured with a 500-VDC test
voltage megohmmeter).
12/24 VDC supplied to drive loads
None
300 mA max. at 5 VDC (with all points ON)
7.5 W
Permitted
250 g
40.3×130×103.9 mm (W×H×D)
3-40
Specifications