YASKAWA MEMOCON GL120 User Manual page 248

c) If I/O signal cables are assembled by the user, use the following electric cables and
connectors:
• Cable size: 0.08 mm
• Module side connector: 10140-6000EL+10340-55S0-008-F (3M)
d) When an W0300 32-point I/O Module Cable is used, select the appropriate cable
from the three cables shown in the following table:
Table 6.8 W0300 32-point I/O Module Cables
Item
Name
Model Name
Model No.
Length (L)
Cable Specifications
Terminals Module Side
External
Device Side
As shown in the following figure, the external device side of the W0300 cable is
divided into individual wires. The cable size is 0.08mm
e) When a W0302 32-point I/O Module cable is used, select the appropriate cable from
the three cables shown in the following table:
Table 6.9 W0302 32-point I/O Module Cables
Item
Name
Model Name
Model No.
Length (L)
Cable Specifications
Terminals Module Side
External
Device Side
2
(AWG28)
W0300 Cable
W0300-01 W0300-03
JZMSZ-120W0300-01 JZMSZ-120W0300-03
1.0 m 3.0 m
Shielded cable of 40 conductors, corresponding to UL20276, AWG28
2
(0.08mm )
Connector: 10140-6000EL+10340-55S0-008-F (3M)
Loose wires; Cable length: 150mm, pin number labeled on each wire
Connector (Module side)
Model name
Pin number is attached to each wire.
Shielded cable
W0302 Cable
W0302-01 W0302-03
JZMSZ-120W0302-01 JZMSZ-120W0302-03
1.0 m 3.0 m
Shielded cable of 40 conductors, corresponding to UL20276, AWG28
2
(0.2mm )
Connector: 10140-6000EL+10640-5500-008 (3M)
Loose wires; Cable length: 150mm, pin number labeled on each wire
6-21
Specifications
W0300-05
JZMSZ-120W0300-05
5.0 m
2
.
Loose wires
(external device side)
40-core
loose wires
150 mm
Specifications
W0302-05
JZMSZ-120W0302-05
5.0 m
6.2 Panel Wiring
6