Table of Contents
Advertisement
4 Analog I/O Specifications
4.4.3 I/O Allocations
6) Setting the Software Filter (Only for Analog Input Modules)
(1) Move the cursor to Service scan and press the Enter Key to access the ser-
vice scan setting.
Fig. 4.15 Parameter Setting Screen: Service scan
(2) A screen will appear so that the service scan setting can be selected.
Move the cursor to either NORMAL or HIGH and press the Enter Key to select
the desired scan service.
The MEMOSOFT is set by default to NORMAL.
Fig. 4.16 Service Scan Selection
Make sure that the Parameter Setting Screen (I/O Map Module Editor) is being dis-
played.
(1) Move the cursor to Soft Filter and press the Enter Key to access the software
filter setting.
Fig. 4.17 Parameter Setting Screen: Software Filter
4-48
Advertisement
Table of Contents
