YASKAWA MEMOCON GL120 User Manual page 77

Note: (1) Pins 9 and 29, pins 19 and 39, pins 10 and 30, pins 20 and 40 are internally
connected. Connect these pins externally as well, otherwise, malfunction may
occur.
(2) Connector for External Connections
On the Module: 10240-52A2JL (made by 3M)
(3) Recommended Wires
Use wires of 0.08mm
(4) External Connection Cable
Use a 32-point I/O Module Cable to connect to field devices. Refer to 3.3 I/O
Module Cables for details.
4) External Appearance
Module description
(120DDO35410)
Color code
(dark blue)
LED area
Module mounting screw
(Use a M4 Phillips screwdriver.)
LED Area
120 DDO 354 10
F
ACTIVE
1 9 17 25
2 10
18 26
3 11
19 27
12
4 20 28
5 13 21 29
6 14 22 30
7 15 23 31
8 16
24 32
2
(AWG28) to connect to each connector pin.
32-point I/O Module cable connector
LED Color
ACTIVE Green
F Red
1 to 32 Green
3-47
3.2 Digital Output Module Specifications
Signal label insert
Hinged terminal
cover
Indication when ON
Processing I/O.
Fuse blown out, or external power supply not
connected.
The corresponding LED is lit when the output
signal is ON.
3