YASKAWA MEMOCON GL120 User Manual page 80

3 Digital I/O Specifications
3.2.7 12/24-VDC 64-point Output Module
2) The following diagram shows the circuit configuration.
CAUTION
Photo-
coupler
From CPU
(Continued on next page)
Do not replace the built-in fuse of the 12/24-VDC 64-point Output Modules.
If the built-in fuses are replaced by anyone other than a Yaskawa-approved
technician, failure or malfunction may occur in the Modules.
CN1 connector
pin numbers
Output signal
indicator
Fuse
Blown fuse/power
disconnection indi-
cator
Blown-fuse
detection circuit
3-50
Output 1
Loads
Output 2
Output 15
Output 16
- Common 1
12/24 VDC
+ Common 1
Output 17
Loads
Output 18
Output 31
Output 32
- Common 2
12/24 VDC
+ Common 2