Operations Using Memosoft; Analog Input Module I/O Allocation Screen - YASKAWA MEMOCON GL120 User Manual

4.4

Operations Using MEMOSOFT

This section describes the I/O allocations (maps) using the MEMOSOFT.
4.4.1

Analog Input Module I/O Allocation Screen

This section gives information on the MEMOSOFT I/O Traffic Cop Screen and the
Parameter Setting Screen.
1) The I/O Traffic Cop (i.e., I/O Allocation) Screen
a) Module Type
Enter the Analog Input Module type, for example, 120AVI02000.
b) Set the I/O references to be used by the Analog Input Module.
When the first reference number is input, the cursor will move to the field for the last
reference number and the last reference number will be displayed automatically,
indicating the reference number that can be input. Press Enter Key to accept the
value, or change it to the desired value, if required.
2) The Parameter Setting Screen (Zoom)

4.4.1 Analog Input Module I/O Allocation Screen - - - - - - - - - - - - - - - - - - 4-41

4.4.2 Analog Output Module I/O Allocation Screen - - - - - - - - - - - - - - - - - 4-42
4.4.3 I/O Allocations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-43
Fig. 4.1 I/O Traffic Cop Screen
Fig. 4.2 Parameter Setting Screen
4-41

4.4 Operations Using MEMOSOFT

(a
(b
(a
(b
(c
4