Analog Output Modules (0 To 10 V, 2 Channels) (0 To 5 V, 2 Channels) - YASKAWA MEMOCON GL120 User Manual

4.2.2 Analog Output Modules (0 to 10 V, 2 channels)
(0 to 5 V, 2 channels)
1) Performance Specifications
Item
Name
Model Name
Model No.
Output Signal Range
Maximum Allowable Load
Current
Number of Output
Channels
Digital Resolution
Data Format
Error
Maximum Instantaneous
Noise Error
Output Delay Time
Number of Allocated Words 2 words/Module
Maintenance/Diagnosis
Functions
Outputs when CPU Stops
External Connections
Status Indication
Insulation Method
Dielectric Strength
Insulation Resistance
External Power Supply
Internal Current
Consumption
Maximum Heating Value
Hot Swapping
Approximate Mass
External Dimensions
Recommended Cable
Specification
Analog Output Module
(0 to 10 V, 2 channels)
D/A 0-10 V 2CH
JAMSC-120AVO01100
0 to 10 V
5 mA (2 kΩ)
2 channels, isolated individually
12 bits
Binary: 0 to +4000
±0.2 % F.S. (25 °C)
±0.5 % F.S. (0 to 60 °C)
±1.0 % (25 °C) when static noise of 400 V is applied
5 ms max.
Watchdog timer (timeout: 262 ms)
Maximum voltage for abnormal output: ±12 V limit
Select one of the following modes by I/O allocation
1) Open outputs
2) Maintains output data just before the CPU stopped.
3) Outputs user set value.
Removable terminal block with M3 screw terminals
RDY: Lights when Module is normal.
ACT: Lights during output processing.
ERR: Lights when parameter checksum error occurs.
Pulse transformer
1,500 VAC for one minute between output terminals (connected
together) and internal circuits
1500VAC for one minute between channels
100 MΩ min. at room temperature and humidity between output
terminals and ground (measured with a 500-VDC test voltage
megohmmeter).
Not needed
400 mA max. at 5 VDC
2.0 W
Permitted
350 g
40.3×130×103.9 mm (W×H×D)
Shielded twisted-pair wires
2
(AWG16) to 0.5 mm
1.3 mm
4-25
4.2 Analog Output Specifications
Analog Output Module
(0 to 5 V, 2 channels)
D/A 0-5 V 2CH
JAMSC-120AVO01200
0 to 5 V
2.5 mA (2 kΩ)
2
(AWG20)
4