Table of Contents
Advertisement
3 Digital I/O Specifications
3.4.4 8-point Output Modules
3.4.4
1) Purpose of I/O Allocation
2) Module Type Setting
3) I/O Reference Number Setting
Type of Output
Output coils
8-point Output Modules
The relationship between I/O signals and I/O references must be defined so that the
CPU Module can input signals from input devices and output signals to output
devices. The following settings are necessary to define this relationship for Digital
Output Modules.
• Module Type
• I/O Reference Numbers
• I/O Data Format
Setting these items is performed in a process called I/O allocation. I/O allocation is
performed using the MEMOSOFT and the settings are recorded in the I/O allocation
tables stored in memory in the CPU Module.
Refer to the following manuals for specific setting procedures.
• MEOCON GL120, GL130 MEMOSOFT for P120 Programming Panel User's
Manual (Manual No. SIEZ-C825-60.7), Chapter 7 Setting System Configuration.
• MEMOCON GL120, GL130 MEMOSOFT for DOS User's Manual (Manual No.
SIEZ-C825-60.10), Chapter 7 Setting System Configuration.
• MEMOCON GL120, GL130 MEMOSOFT for Windows User's Manual (Manual
No. SIEZ-C825-60.25), Chapter 6 Setting the Module Configuration.
The type of Output Module mounted in the slot is set as the Module type. Only the
last 11 alphanumeric characters of the model number are necessary. For example
120DAO83000 is the Module type for the JAMSC-120DAO83000.
(a) The leading I/O reference number used by the Output Module is set.
(b) Any one of the I/O reference numbers and points listed in the following table
can be set. Output coils can be allocated for the 8-point Output Modules.
CPU10, CPU20, CPU21
000001 to 001024
References for I/O Allocation
CPU30, CPU35
000001 to 004096
3-92
Points/Registers
8 points
Advertisement
Table of Contents
