YASKAWA MEMOCON GL120 User Manual page 115

Table of Contents

Advertisement

3) I/O Reference Number Setting
(a) The leading I/O reference number used by the Input Module is set.
(b) Any one of the I/O reference numbers and points listed in the following table
can be set.
Type of Input
CPU10, CPU20, CPU21
Input Relays
100001 to 101024
Input Registers
300001 to 300512
(c) When an input relay is set, the leading I/O reference number must satisfy the
following equation:
Leading reference number of I/O relay = 100001 + 16 n
where n = 0 to 63 for the CPU20 and
For example, 100001 can be set as the leading reference number, but
100002 cannot.
4) I/O Data Format
The following items can be set to define the I/O data format. There is, however, gen-
erally no need to change these settings because the default settings can be used
for most normal applications.
a) Bit Order
I/O can be processed by handling data either in ascending or descending order of
the bits. This is explained next for allocation of both input relays and input registers.
(1) When 32-point input relays are allocated from 100001, the bit order can be set
to either "MSB" or "LSB," as described in the following table and shown in the
illustration below it. Allocation is performed in units of 16 input points.
Input Relay MSB Setting
Input Relay LSB Setting
Refer to Fig. 3.3 Allocation of Input Relays for details.
References for I/O Allocation
CPU30, CPU35
100001 to 104096
300001 to 300512
n = 0 to 255 for the CPU30
The leading input reference number (100001) is allocated to the
smallest input number of the first 16 input points (input 1) on the Input
Module. The next input reference number (100017) is allocated to the
smallest input number of the second 16 input points (input 17) on the
Input Module.
The leading input reference number (100001) is allocated to the larg-
est input number of the first 16 input points (input 16) on the Input
Module. The next input reference number (100017) is allocated to the
largest input number of the second 16 input points (input 32) on the
Input Module.
3-85
3.4 I/O Allocation
Points/Registers
32 points
2 registers
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Memocon gl130

Table of Contents