YASKAWA MEMOCON GL120 User Manual page 205

Item
Maximum Heat Value
Hot Swapping
(Removal/insertion under power)
Approx. Mass
External Dimensions
2) The following diagram shows the circuit configuration.
Photo-
coupler
From CPU
Photo-
coupler
Do not replace the built-in fuses of the Register I/O Modules.
CAUTION
If the built-in fuses are replaced by anyone other than a Yaskawa-approved
technician, a failure or malfunction may occur in the Register I/O Modules, and
the guarantee is void.
Note: (1) The following pins of CN1 are internally connected: The pins A1, B1, A11, and
B11, and the pins A2, B2, A12, and B12.
Also connect these pins externally. Not connecting these pins externally may
cause malfunction of GL120 and GL130.
(2) External connection connector (included)
Connector: FCN-361J040-AU (soldered) (made by Fujitsu Ltd.)
Cover: FCN-360C040-B (made by Fujitsu Ltd.)
(3) Recommended wires
Use 0.26 mm
3.5 W
Permitted
300g
40.3×130×103.9 mm (W×H×D)
2
(AWG23) wires for connections between the connector pins.
5-7
5.2 Register Output Specifications
Specifications
Connector CN1
Pin No.
DATA1
B20
DATA2
A20
DATA3
B19
DATA4
A19
+12/24V
A11
B11
A1
B1
SEL1
B10
0V
A12
B12
Fuse
A2
B2
LED indicator
(with latch)
+
- Latch
+
-
12/24VDC
5