MacDon R113 Assembly Instruction Manual page 85

13. Remove the M20 nut (A), washers, and hex head
bolt (B) securing carrier leg (C) and float spring arm (D)
to header at right end of header.
14. Move float spring arm (D) clear of conditioner.
15. Remove the M20 nut (A), washers, and hex head
bolt (B) securing carrier leg (C) to header at left end
of header.
16. Remove forward pin (A) connecting center-link (B)
to anchor (C) and separate center-link from anchor.
Reinstall pin in anchor to store.
17. Remove forward pin (D) and four washers (E) attaching
indicator links (F) to anchor (B). Reinstall pin and
washers in anchor to store.
18. Secure center-link and indicator links to carrier frame
with a strap or wire to prevent them from contacting the
header during separation.
169821
CHANGING THE CONDITIONER
Figure 6.6: Right Side of Carrier
Figure 6.7: Left Side of Conditioner
Figure 6.8: Center-Link and Indicator Links
79
Revision D