MacDon R113 Assembly Instruction Manual page 134

 Item
Check that cutterbar doors are unbolted from
centre channel frame, shipping wire is removed
from cutterbar curtains, and cutterbar curtains are
hanging properly.
Check hydraulic hose and wiring harness routing.
Grease all bearings and drivelines.
Check conditioner drive gearbox lubricant.
Check mower conditioner drive gearbox lubricant.
Check forward and rear swivel gearbox lubricant.
Check cutterbar lubricant.
Check cutterbar area carefully for loose parts and
hardware on the cutterbar.
WARNING
Objects can be ejected with considerable force
when the machine is started and may result in
serious injury or machine damage.
RUN-UP PROCEDURE
Check hydraulic hose and wiring harness routing
to ensure adequate clearance when raising or
lowering header.
Check that tail lights and hazard lights are functional.
POST RUN-UP CHECK – STOP ENGINE
Check belt drive for proper idler alignment and
overheating bearings.
Check for hydraulic leaks.
Check that header manuals are in storage
compartment.
Date Checked:
128
PREDELIVERY CHECKLIST
Reference
5.11 Unpacking Curtains, page 46
7.3 Lubrication Procedure, page 94
8.7 Checking Conditioner Drive Gearbox Lubricant,
page 105
8.8 Checking Mower Conditioner Drive Gearbox
Lubricant, page 106
8.9 Checking Forward and Rear Swivel Gearbox
Lubricant, page 107
8.10 Checking Cutterbar Lubricant, page 109
8.15 Running Up the Mower Conditioner, page 115
8.13 Checking Lights, page 113
8.2 Checking Drive Belt, page 100
8.14 Checking Manuals, page 114
Checked by:
—
—
—
—