Installing 2-Point Hitch (Cat. Ii) Adapter - MacDon R113 Assembly Instruction Manual

UNLOADING AND ASSEMBLING THE MOWER CONDITIONER

5.10 Installing 2-Point Hitch (Cat. II) Adapter

To set up the 2-point hitch:
1. Remove shipping wire or banding (A) securing
shipping blocks (B) at front of hitch, and remove blocks.
2. Swivel driveline and gearbox so that driveline is
facing forward.
3. Retrieve 2-point hitch adapter shipment.
4. Remove shipping wire (A) and material from stand (B)
and remove stand from hitch adapter (C). Set aside for
later installation.
5. Remove strapping that secures pin (A) to adapter (B).
Do not remove other strapping.
6. Remove pin (A) from adapter, and remove bolt (C) and
nut from pin (A).
169821
Figure 5.50: Hitch Packing
Figure 5.51: 2-Point Hitch Packing
Figure 5.52: 2-Point Adapter
44
Revision D