Setting Up The Tractor; Adjusting The Drawbar - MacDon R113 Assembly Instruction Manual

UNLOADING AND ASSEMBLING THE MOWER CONDITIONER

5.13 Setting Up The Tractor

5.13.1 Adjusting the Drawbar

CAUTION
Shut off tractor, engage parking brake, and remove
key before working around hitch.
1. Adjust tractor
specifications listed in Table
Specifications, page
2. Secure the tractor drawbar so the hitch pin hole is
directly below the driveline.
Table 5.1 ASAE Standard A482 Specifications
Dimension
X
Y
Z
169821
drawbar to meet
5.1 ASAE Standard A482
67.
1-3/8 in. Diameter
16 in. (406 mm)
the
Figure 5.112: Tractor Drawbar Adjustments
A - PTO B - Tractor Drawbar C - Ground
X - Dimension X Y - Dimension Y
1000 rpm Power Take-Off
7-7/8–13-3/4 in. (200–350 mm)
8 in. (203 mm) recommended
13–17 in. (330–432 mm)
16 in. (406 mm) recommended
67
Z - Dimension Z
1-3/4 in. Diameter
20 in. (508 mm)
Revision D