UNLOADING AND ASSEMBLING THE MOWER CONDITIONER
5. Line up the two mounting holes in arm weldment and
forward threaded holes in gearbox.
6. Install spacers (A) into arm weldment (B) and install
M16 x 80 hex head bolts (C) with red Loctite
washers (D).
7. Torque bolts to 150 lbf·ft (203 N·m).
8. Slide the driveshield cone onto the gearbox and close
latches (A).
169821
®
, and
Figure 5.40: Steering Arm
Figure 5.41: Driveline Shield
39
Revision D