Closing Driveshields - MacDon R113 Assembly Instruction Manual

7.2 Closing Driveshields

CAUTION
Do NOT operate the machine without the driveshields in place and secured.
NOTE:
Images shown are for left side driveshield - right side driveshield is similar.
1. Position driveshield onto pins at base of driveshield
(if necessary).
2. Push driveshield (A) to engage latch (B).
3. Check that driveshield is properly secured.
4. Replace tool (B) and lynch pin (A) on pin (C).
169821
LUBRICATING THE MOWER CONDITIONER
93
Figure 7.4: Driveshield and Latch
Figure 7.5: Tool to Unlock Driveshield
Revision D