MacDon R113 Assembly Instruction Manual page 65

UNLOADING AND ASSEMBLING THE MOWER CONDITIONER
Installing Secondary Lift Hose
NOTE:
The secondary lift hose is required to lift the field wheels
fully into storage position when the mower conditioner
is in transport mode.
14. Retrieve the following secondary lift hoses from
shipping bag according to your header size:
• 13-Foot Headers: Use hose MD #224160
• 16-Foot Headers: Use hose MD #224162
15. Undo adjustable strap (A) around hoses at aft end
of hitch.
16. Feed long hose (B) into access hole (C) at rear of hitch
through hitch to opening at front.
NOTE:
Same fittings are used at both ends.
17. Position long hose (A) so that the exposed length at
front of hitch matches existing hose (B). Route hose
through guide (C).
18. At front of hitch, loosen nut (D) on hose clamp (E) until
hose (A) can be positioned in clamp.
19. Tighten nut (D).
20. At rear of hitch, secure hoses with adjustable strap (A).
169821
Figure 5.90: Lift Hoses
Figure 5.91: Lift Hoses
Figure 5.92: Lift Hose
59
Revision D