MacDon R113 Assembly Instruction Manual page 76

UNLOADING AND ASSEMBLING THE MOWER CONDITIONER
6. Position driveline (A) onto tractor power take-off (PTO).
7. Pull back collar (B) on driveline (A), and push driveline
until it locks. Release collar.
8. Route safety chain (C) from mower conditioner through
chain support (D) on drawbar hitch adapter and around
tractor drawbar support. Lock hook on chain.
NOTE:
If the tractor has a three-point hitch, lift the links as
far as possible to prevent damage to the hitch.
9. Raise jack (A), and remove pin (B).
10. Move jack (A) to storage position on top of hitch, and
secure with pin (B).
11. Proceed to 5.14.3 Connecting Hydraulics, page
169821
Figure 5.117: PTO Driveline
Figure 5.118: Hitch Jack
73.
Figure 5.119: Jack Storage
70
Revision D