MacDon R113 Assembly Instruction Manual page 125

5. Operate steering control lever to lower transport
wheels (A) and hold lever until mower conditioner (B)
is lifted off the ground.
6. Continue to hold
so that the mower
COUNTERCLOCKWISE and under the hitch (C).
7. Release steering
conditioner (B) stops rotating.
8. Operate the lift control lever to lower the mower
conditioner (B) onto the transport assembly (A), to
raise the field wheels (D), and to engage transport
latch (E) onto hitch (C).
NOTE:
If necessary, adjust position of latch assembly so
that it engages hitch. Torque bolts to 340 lbf·ft
(460 N·m) after tightening.
9. Operate the steering control lever to ensure the carrier
frame (A) and hitch (B) are locked together.
10. Activate the hazard lights (C) on the mower conditioner.
Check that all lights are working.
11. Ensure that the slow moving vehicle sign (D) is visible
from behind the mower conditioner.
169821
PERFORMING PREDELIVERY CHECKS
the steering control
conditioner (A)
control lever when
lever
rotates
mower
Figure 8.33: Transport Mode
Figure 8.34: Transport Mode
119
Revision D