Attaching Mower Conditioner To The Tractor; Attaching With Drawbar Hitch - MacDon R113 Assembly Instruction Manual
Pull-type rotary disc mower conditioner
Hide thumbs
Also See for R113:
- Operator's manual (294 pages) ,
- Assembly instruction manual (212 pages) ,
- Unloading and assembly instructions (166 pages)
Table of Contents
Advertisement
UNLOADING AND ASSEMBLING THE MOWER CONDITIONER
5.14 Attaching Mower Conditioner to the Tractor
5.14.1 Attaching with Drawbar Hitch
CAUTION
Shut off tractor, engage parking brake, and remove key before working around hitch.
1. Remove lynch pin (A) from clevis pin (B), and remove
clevis pin from mower conditioner hitch.
2. Move tractor to position drawbar hitch adapter (A)
under pin (B) in mower conditioner hitch. Adjust height
as necessary with jack (C).
3. Shut down tractor and remove key from ignition.
4. Lower hitch with jack (A) so that pin (B) engages
drawbar hitch adapter (C).
5. Install clevis pin (D) and secure with lynch pin (E).
169821
Figure 5.114: Mower Conditioner Hitch
Figure 5.115: Mower Conditioner Hitch
Figure 5.116: Mower Conditioner Hitch
69
Revision D
Advertisement
Table of Contents
