MacDon R113 Assembly Instruction Manual page 32

UNLOADING AND ASSEMBLING THE MOWER CONDITIONER
12. Remove and discard bolt (A) securing deflector (B)
to frame.
13. Remove handle (A), washers, and bolt from top
cover (B).
14. Swing deflector (C) under outboard top cover (B)
so that handle can be installed into deflector and
top cover.
15. Install carriage bolt (A), washer (B), spring washer (C)
and handle (D) as shown.
16. Position deflector so the handle (D) is approximately
centered in slot, and tighten handle.
169821
Figure 5.11: Side Deflector Assembly
Figure 5.12: Side Deflector Assembly
Figure 5.13: Deflector Adjustment
26
Revision D