MacDon R113 Assembly Instruction Manual page 39

UNLOADING AND ASSEMBLING THE MOWER CONDITIONER
9. Line up holes in pin (A) with holes in carrier and
install six M20 x 65 bolts (B), hardened washers, and
lock nuts (C). Install bolts from the top with washers
under head.
NOTE:
If endwise transport system will be installed, do
not tighten the two middle bolts at this time.
10. Torque bolts to 340 lbf·ft (461 N·m).
169821
Figure 5.30: Pivot Pin
33
Revision D