Unloading And Assembling The Mower Conditioner; Unloading Shipment - MacDon R113 Assembly Instruction Manual

5 Unloading and Assembling the Mower Conditioner

Perform the following steps to unload and assemble the mower conditioner

5.1 Unloading Shipment

CAUTION
To avoid injury to bystanders from being struck by machinery, do NOT allow persons to stand in
unloading area.
CAUTION
Equipment used for unloading must meet or exceed the requirements specified below. Using inadequate
equipment may result in chain breakage, vehicle tipping or machine damage.
Minimum Capacity
Minimum Height
Overhead Lifting Quality (1/2 inch)
Figure 5.1: Unloading Hitch
1. Remove hauler's tie down straps and chains.
2. Attach chain (A) to two brackets (B) on top of hitch as shown.
3. Adjust chain lengths so hitch is lifted evenly.
169821
Lifting Vehicle
Chain
5000 lb. (2270 kg) minimum working load
21
8000 lb. (3630 kg)
15 ft. (4.5 m)
Revision D