7 Lubricating the Mower Conditioner
WARNING
To avoid bodily injury or death from unexpected start-up or fall of raised machine, stop engine, remove
key and engage lift cylinder stops before going under machine for any reason.
The mower conditioner has been lubricated at the factory. However, it is recommended to lubricate the mower
conditioner prior to delivery to offset the effects of weather during outside storage and transport, and to familiarize
the Dealer with the machine.
7.1 Opening Driveshields
CAUTION
Do NOT operate the machine without the driveshields in place and secured.
NOTE:
Images shown are for left side driveshield—right side driveshield is similar.
1. Remove lynch pin (A) and tool (B) from pin (C).
2. Insert flat end of tool (A) into latch (B) and turn it
counterclockwise to unlock.
169821
Figure 7.1: Driveshield
Figure 7.2: Driveshield Latch
91
Revision D