UNLOADING AND ASSEMBLING THE MOWER CONDITIONER
6. Install steel line (A) between selector valve (B) and
transport swing control (C).
7. Install steel lines (A) and (B) onto transport swing
control valve (C).
8. Attach plastic block (D) to ends of lines.
9. Loosely assemble steel line (A) with tee (B), and
install between completion assembly (C) and steel line
installed in previous step.
10. Install steel line (D) onto selector valve (E) and
completion assembly (C).
169821
Figure 5.84: Selector Valve Plumbing
Figure 5.85: Selector Valve Plumbing
Figure 5.86: Completion Valve Plumbing
57
Revision D