UNLOADING AND ASSEMBLING THE MOWER CONDITIONER
1. Retrieve steel lines and hoses from shipping bag.
2. Install line (A) between transport alignment assembly
fitting (B) and hitch steering cylinder fitting (C).
3. Install hoses (A) and (B) between steering cylinder (D)
and transport selector valve (C).
4. Install hose (A) between alignment control (B) and
selector valve (C).
5. Install hose (D) between alignment control (B) and
transport swing control (E).
169821
Figure 5.81: Alignment Plumbing
Figure 5.82: Selector Valve Plumbing
Figure 5.83: Alignment Plumbing
56
Revision D