MacDon R113 Assembly Instruction Manual page 49

UNLOADING AND ASSEMBLING THE MOWER CONDITIONER
6. Remove shipping wire (A) that secures pin (B) in
casting. Do not remove other strapping.
7. Remove pin (B) from casting and remove bolt (C) and
nut from pin.
8. Using a floor jack or equivalent under pallet (A), raise
hitch adapter (B) into position under the gearbox.
9. Maneuver hitch adapter (B) so that pin (C) can be
installed to secure adapter to hitch.
10. Secure pin with bolt (D) and nut.
11. Remove floor jack and if necessary remove remaining
strapping and pallet (A) from hitch adapter.
169821
Figure 5.48: Hitch Casting
Figure 5.49: Drawbar Hitch
43
Revision D