MacDon R113 Assembly Instruction Manual page 68

UNLOADING AND ASSEMBLING THE MOWER CONDITIONER
3. Install the right end light assembly (A) on left float
spring mount with bolts (B) removed from previous
step. The red (C) light should be towards rear of
machine when in transport mode.
4. Remove red lamp (C) from bracket and install
into pre-drilled holes next to amber lamp with
existing hardware.
5. Remove lamps (A) from left light assembly bracket (B).
Discard bracket and hardware.
6. Retrieve new light bracket (C) from shipment.
7. Install amber lamp (A) and red lamp (B) onto new
bracket (C) as shown with hardware provided.
169821
Figure 5.99: Left Side of Carrier
Figure 5.100: Left Side Light Assembly
Figure 5.101: Light Assembly
62
Revision D