Checking Lights - MacDon R113 Assembly Instruction Manual

8.13 Checking Lights

1. Check that lights (A) and (B) are properly located on
the mower conditioner to suit the set up configuration.
2. Check light mountings for security and damage.
3. Check operation of hazard lights (A) and brake lights
(B) during machine run-up.
169821
PERFORMING PREDELIVERY CHECKS
113
Figure 8.24: Standard Configuration
Figure 8.25: Endwise Transport Configuration
A - Amber Hazard Lights
C - Reflectors
B - Red Tail/Brake Lights
Revision D