MacDon R113 Assembly Instruction Manual page 55

UNLOADING AND ASSEMBLING THE MOWER CONDITIONER
4. Ensure lift cylinder lock out valve (A) is closed.
5. Disconnect hose (B) from 45° fitting (C) at lift cylinder.
6. Remove plug and cap from tee (D) on hose (E).
7. Connect tee (D) to 45° fitting (C) and connect hose (B)
to tee (D).
8. Tighten fittings.
9. Retrieve clevis pin (A) and cotter pin (B) from shipping
bag and install onto hitch bracket at side of hitch.
Installing Transport Assembly
10. Remove bolt (A), hardened washer, and nut securing
slow moving vehicle (SMV) sign (B) to carrier frame
and remove sign.
reinstallation.
169821
Retain sign and hardware for
Figure 5.62: Latch Plumbing
Figure 5.63: Latch Pin
Figure 5.64: SMV Sign Attached to
Carrier Frame
49
Revision D