New Holland T8010 Manual page 1689

STEP 70
The display will read TRANS SETUP. Press the
PROG key to enter the Transmission Setup Menus.
STEP 71
The display will read CLTCH CAL. Push the DECR
key.
STEP 72
The display will read GEAR DEFAULT. Push the
PROG key.
Section 55 - Electrical System, Controller - Chapter 6
RD05F125
RD05F126
RD05F131
55-6-44
STEP 73
The display will read SETUP FWD GEAR. Push the
PROG key
STEP 74
The display will read *FWD GEAR# 7. Press the
INCR key to increase the gear number, or press the
DECR key to decrease the gear number. If no
change is desired leave gear number as it is. Press
the PROG key when desired gear number is set.
STEP 75
The display will read SETUP REV GEAR. Push the
PROG key.
RD05F166
RD05F167
RD05F168