New Holland T8010 Manual page 1705

Hide thumbs Also See for T8010:

Table of Contents

Press the PROG key to return to the valve section

selection menu. Repeat these steps for other valve

Press the INCR or DECR key to return to the EXIT

screen. Press the PROG key.

NOTE: The AUX controller must leave through the

EXIT screen or the adjustments will not be saved.

Section 55 - Electrical System, Controller - Chapter 6

Aux Setup Menu

With AUX SETUP on the display, push the PROG

The display will show the current setup value, either

AUX NONE, 1SCRAPER, 2SCRAPER or IMP ctl

(IMP ctl will display if installed).

Use the INCR or DECR key to select your option,

then push the PROG key.

Chapters

Table of Contents

T8020 T8030 T8040