New Holland T8010 Manual page 1678

STEP 18
The display will read ODD DEGC. The Calibration
Clutch Temperature View Menu shows the clutch
temp at which the calibration was performed. Push
the DECR key.
STEP 19
The display will read EVEN DEGC. The Calibration
Clutch Temperature View Menu shows the clutch
temp at which the calibration was performed.
Continue pushing the DECR key to display the
calibrated clutch temperature values for C/O, C1, C3,
C5, LOW, MID, HIGH, REV and MSTR clutch.
NOTE: Pushing the PROG key at any point will
return you to the upper level menu, CAL CLTCHTMP.
Section 55 - Electrical System, Controller - Chapter 6
RD05F109
RD05G008
55-6-33
STEP 20
The Master Clutch temperature display reading is the
final readout. Push the PROG key.
NOTE: If you continue to push the DECR key the
display will start through the menu again starting with
the Odd clutch temp reading.
STEP 21
The display will return to CAL CLTCHTMP. To display
the next Transmission View Menu push the DECR
key.
RD05F110
RD05F108